What is the difference between a foundation and a footing?

Footings are the base that sits directly on the soil and spreads the load of the building. The foundation is the structure that sits on top of the footings and supports the walls and floors of the building. Footings are typically wider and thicker to distribute weight over a larger area and prevent sinking.

How deep should footings be in Brentwood, CA?

In Brentwood, footings typically need to be at least 12 inches deep, but depth varies based on soil conditions, building codes, and the structure being supported. Clay soils may require deeper footings, while stable soils can use shallower depths. We assess your specific site and follow local building codes to determine the correct footing depth.

Do I need permits for foundation work?

Yes, foundation work almost always requires permits and inspections. These ensure the work meets safety and building standards. We handle permit applications and coordinate inspections as part of our service. Skipping permits can result in fines and problems when you sell your property, so it is essential to do foundation work by the book.

Concrete Foundations & Footings

Solid foundations and footings that support your building for decades to come.

Professional concrete foundation work in Brentwood, CA

Why Your Foundation Matters Most

Everything sits on your foundation. Whether you are building a new home, adding a room, or constructing a detached garage, the foundation determines how well your structure holds up over time. A properly poured foundation prevents cracks, settling, and moisture problems that cost thousands to fix later.

Here in Brentwood, foundation work requires understanding our local soil conditions. We deal with expansive clay soils that shift with moisture changes. This movement can crack weak foundations or cause settling issues. We account for these conditions by using proper reinforcement and engineering our pours to handle ground movement.

We have been pouring foundations since 2024 and work with local builders, contractors, and property owners on residential and commercial projects. From simple shed footings to full house foundations, we provide the structural support your building needs.

Types of Foundations We Pour

Slab-on-grade foundations for new construction
Stem wall and crawl space foundations
Isolated footings for columns and posts
Continuous footings for load-bearing walls
Grade beams and foundation reinforcement
Commercial and industrial foundations

Choosing the Right Foundation Type

The type of foundation you need depends on your building size, soil conditions, and how the structure will be used. Slab-on-grade foundations work well for single-story homes and are the most economical option. They combine the foundation and floor into one continuous pour.

Stem wall foundations create a crawl space underneath your building. This allows access to plumbing and electrical systems and provides better ventilation in certain climates. They require more excavation and concrete but offer advantages for maintenance and repairs.

For additions, decks, or structures built on slopes, we use isolated footings or pier foundations. These deep footings reach stable soil and support point loads from columns or posts. We also pour continuous footings that support entire walls, distributing weight evenly across the foundation.

Our Foundation Installation Process

Foundation work follows strict building codes and engineering requirements. Here is our process:

Step 1: Engineering and Planning

We review your building plans and engineering specifications. We also check local building codes and pull necessary permits. Soil tests help us determine the right depth and reinforcement needed.

Step 2: Excavation and Site Preparation

We dig trenches or excavate the full foundation area to the specified depth. The bottom gets leveled and compacted. Any unsuitable soil is removed and replaced with engineered fill.

Step 3: Forms and Reinforcement

We build sturdy forms that create the foundation shape. Rebar cages are tied and positioned according to engineering plans. This steel reinforcement gives the concrete tremendous strength.

Step 4: Concrete Placement

We pour concrete to the specified strength mix. Footings go in first, followed by stem walls or slabs. The concrete is vibrated to remove air pockets and ensure it fills all spaces in the forms.

Step 5: Curing and Inspection

Your foundation needs time to cure and reach design strength. We protect it during this period and coordinate building inspections. Once approved, your contractor can begin framing on schedule.

Working with Your Builder or Contractor

We regularly work with residential and commercial builders throughout Brentwood. We understand construction schedules and coordinate our work to keep your project moving. Need anchor bolts set for framing? We place them during the pour according to your plans.

We also handle foundation work for DIY builders and owner-builders. If you are taking on your own project, we guide you through the permit process and make sure your foundation meets all code requirements. Our goal is to set you up for success with a solid foundation you can build on confidently.

Whether you are a professional contractor or a property owner planning a new building, we provide quality foundation work backed by our experience and local knowledge. Call us to discuss your project and get a detailed quote based on your engineering plans.

Call (925) 536-0846